diary

2026 05-08

High-Precision Oval Gear Flowmeter for Flux Measurement
High-Precision Oval Gear Flowmeter for Flux Measurement Fluorescence Metering, 1% Accuracy, Non-Corrosion: CX-P2-F Oval Gear Flowmeter (PPS Material/NPN Output) In flux delivery, corrosion and low flow rate accuracy are two major pain points. Flux is typically weakly acidic, with a viscosity of only 10 cp, and flow rates are often between 10-300 mL/min. Traditional flowmeters are prone to jamming or measurement errors. The CX-P2-F Oval gear flowmeter is designed to solve these problems. All PPS Material, Resistant to Weak Acid Corrosion Both the housing and gears are made of PPS (polyphenylene sulfide), immune to the acidic components in flux, eliminating the risk of metal corrosion and ensuring a long service life.
2026 04-15

Coriolis flow meter Alcohol
In the chemical and pharmaceutical industries, accurate measurement of alcohol (ethanol) has always been a pain point. Especially for high-concentration alcohol (99.8%~99.9%), traditional vortex or electromagnetic flow meters are often ineffective due to its low viscosity and non-conductive properties. Today, we received an urgent consultation from a customer requesting the selection of a suitable Coriolis mass flow meter for a 3-inch pipeline. This is a very typical application scenario, and we will use it as an example to break down the selection logic. Customer's Original Operating Conditions (High Concentration Alcohol) Fluid Medium: Alcohol (Ethanol) Concentration: 99.8% ~ 99.9% Pipe Diameter: 3" ANSI 150
2025 10-30

Selection of Insertion Thermal Flow Meter for Moist Air
Email: [email protected] WhatsApp: 008618049841995 Selection Analysis and Recommendations for Customer's Insertion Thermal Flow Meter Needs I. Analysis of Customer's Core Needs Media Characteristics:Humid air, water content 36g/Nm³ (high humidity, potential condensation risk). Media Temperature: 90℃, pressure 40mmwg (low-pressure operation, sensor temperature resistance must be considered).
2025 10-28

Turbine flowmeter for light aromatic hydrocarbons in butanone naphtha
Optimization suggestions for turbine flowmeter selection and response based on customer needs 1、 Summary of Key Points of Customer Requirements
2025 10-15

Selection of seawater turbine flow meter
Selection of seawater turbine flowmeter Customer requirements Flow range: 30-300m ³/h Pressure: 4MPa Connection method: American standard flange 300 pounds Temperature range: -20 ℃ to 120 ℃
2025 09-16

Buffer Flowmeter Selection
Email: [email protected] WhatsApp: 008618049841995 Buffer Flowmeter Selection The customer provided the following information for use in an ultrafiltration system. Media: Material/Buffer (No Particle Crystallization, No Corrosion) Viscosity: 10 cp Normal Temperature and Pressure Actual Liquid Mass Flowmeter Operating Range: Approximately 42-72 L/h Material: 316L Polishing: Conventional Polishing For flowmeter selection for materials/buffers in ultrafiltration systems (no particle crystallization, no corrosion, viscosity: 10 cp, normal temperature and pressure, flow rate: 42-72 L/h), a DN10 electromagnetic flow meter

prev ... 4 5 6 7 8 9 10 11 12 13 ... next

Submit a message

Friendship tips

Shanghai JSN Micro Flow Meter CO.,LTD as a high-tech industrial products manufacturing and complete sets of product sales, R & D, production, processing and sales as one, with independent import and export rights of enterprises.

The company's main flow meter, level meter, and pressure controller, temperature controller, analytical instruments and other various types of instrumentation. To solve all kinds of problems, and provide complete sales service for customers with professional technical point of view.

International service telephone
(86)021-57632436