Printing and Dyeing Spray Oval Gear Flow Meter

sales01@cxflowmeter.com

JSN customer real case

Printing and dyeing spraying flow monitoring, paper and wood surface spraying system treatment, spraying system surface treatment, 

recommended model of spraying system spraying flow monitoring flow meter micro gear flow meter

1. Working condition analysis:

Medium: water (with trace elements in it)

Viscosity: Similar to water

Flow: 5-150ml/min 25-1000ml/min 50-10000ml/min

Temperature and pressure: normal temperature and normal pressure

Power source: pump

Detection method: instantaneous flow monitoring

Display: There is a PLC on site

Recommended model: 5-150ml/min: M2SS 25-1000ml/min: M6SS

50-10000ml/min: M12SS+M5SS

Specific working conditions: spray system for trace elements in printing and dyeing, paper and wood. 

For example: spray a layer of leveling agent on the fabric to make the fabric more evenly dyed. For closed-loop control,

 set 50ml/min per minute, it will be stable all the time. I used American omega and German Baode before, 

and the price is 3000-4000. Now I want to replace it because the previous price is high, the delivery time is long, 

and the range is not wide enough. We recommend the model recommendation: 5-150ml/min: M2SS 25-1000ml/min: 

M6SS 50-10000ml/min: M12SS+M5SS, a perfect substitute for their previous products, 

and customer feedback in all aspects is very good.

2. Industry analysis:

Why use a flowmeter:

The spray system is similar to surface treatment, and the flow meter can monitor the flow of the sprayed medium to 

achieve closed-loop control. Monitoring the flow rate is helpful for monitoring the spray quantity and surface thickness of the surface.

If you want to know more parameters and quotations of JSN gear flow meter, please consult winny:sales01@cxflowmeter.com