Application of plunger pump for water pumping

Email:sales01@cxflowmeter.com

Whatsapp:008618049841995

Contact: Winny Han

Application of plunger pump for water pumping

Today we recommended one of our plunger pumps to a customer

The customer wants to buy a water pump. The medium is clean water, the flow rate is 60ml/min, and the water is pumped into a 2-liter tank. 

The pressure is the water pressure inside the tank.

60mL per minute uses an 8mm rod plunger pump, but clean water may be used for a long time. Calcium and magnesium ions in the water

 may be adsorbed on the ceramic rod and cause the pump to jam. It needs to be cleaned regularly with citric acid solution.

Finally chose our stainless steel 8mm rod plunger pump

Let me introduce you to the plunger pump

The plunger pump is a hydraulic component, mainly composed of a cylinder, a piston and a plunger. It changes the volume of the sealed 

working chamber through the reciprocating movement of the plunger in the cylinder, thereby achieving the suction and discharge of liquid. 

This kind of pump is widely used in situations where high pressure, large flow rate and flow rate need to be adjusted, such as hydraulic

 presses, construction machinery and ships, etc.

There are many types of piston pumps based on different structures and working principles, including single piston pumps, horizontal 

piston pumps, axial piston pumps, and radial piston pumps. Each type of plunger pump has its specific advantages and applicable applications.

The structure of a single plunger pump is relatively simple and mainly consists of an eccentric wheel, a plunger, a spring, a cylinder and two 

one-way valves. When working, the rotation of the eccentric wheel drives the plunger to reciprocate, thereby realizing the suction and 

discharge of liquid. The characteristic of this kind of pump is that the displacement is only related to the structural parameters of the pump, 

and the operation is stable and reliable, but the noise may be loud.

Horizontal plunger pumps use multiple plungers installed in parallel, and the crankshaft or eccentric shaft drives the plungers to reciprocate. 

This kind of pump has a compact structure, can produce large pressure and flow, and is suitable for occasions requiring high pressure and

 large flow.

Axial piston pumps and radial piston pumps have higher technical content and wider application range. Through their special structural

 design and working principle, they can achieve higher pressure and greater flow, and at the same time have the advantages of convenient 

flow adjustment and compact structure.

In general, the plunger pump is an efficient and reliable hydraulic component with a wide range of application prospects. When selecting 

and using a plunger pump, it is necessary to make a reasonable selection based on the specific working environment and needs, and follow

 correct operation and maintenance procedures to ensure its normal operation and long-term stability. At the same time, for media such as 

clean water, it is necessary to pay attention to possible adsorption problems of calcium and magnesium ions, and take corresponding 

cleaning measures to prevent the occurrence of pump jamming.

If you now encounter the problem of choosing a pump, please feel free to consult CIXIFM winny:

Email:sales01@cxflowmeter.com

Whatsapp:008618049841995

Contact: Winny Han