Chemical liquid micro flow meter

Chemical liquid micro flow meter, Contact email: sales6@microflowmeter.com

Current Chemical liquid micro flow meter industry market a Red Sea, and even the industrial clusters of Chemical liquid micro flow meter Anhui is quite a mixed bag, a large part of the assembly of parts by the procurement of enterprises, there are quite a few simply even assembly Chemical liquid micro flow meter also feel trouble , Simply dry bag company's life, foreign also known as the Chemical liquid micro flow meter manufacturers, these so-called factory does not have its own calibration equipment, production of precision Chemical liquid micro flow meter is difficult to control the face of such a complex market environment, the company Chief Engineer Mr. Tu resigned before the Siemens senior engineer, with the dream of industrial flow meters and confidence, the establishment of Shanghai Ji-sheng Instruments Co., Ltd., deep roots, Everlasting. At present, Shanghai Ji-sheng production Chemical liquid micro flow meter has been sold Over 100 countries and regions in the world, the products have been harshly tested on hundreds of mediums in dozens of mediums and achieved a very good reputation in the market.

Shanghai JSN Micro Flow Meter CO.,LTD is established in 2011, directly under Shanghai jurisdiction.Our factory is professional produce electromagnetic flow meter, Super Micro Liquid Flow Meter,Chemical liquid micro flow meter ,Mass Flow Meter,Circle Spur Gear Flow Meter,Gear Pump,Gear metering Pump etc. After decades of ups and downs, we have established a deep affection with electricity, chemical industry, petroleum, cement, sewage, steel, and environmental protection all over the country. Our factory, as a national key instrumentation production base, has received the Provincial Department of Science and Technology. The leader attaches great importance to, and has received a lot of company leadership acclaim and full affirmation. At the same time was rated as high-tech enterprises in Shanghai, and passed IS09001 quality system certification.
Chemical liquid micro flow meter is a new type of volumetric flowmeter, in addition to a positive displacement flowmeter with high accuracy, the flow is not sensitive to other advantages, there are the following advantages: Wide range, usually in the flow meter is 10: l, and Deep flowmeter is generally 100: 1, or even 1000: 1, the accuracy is still above 0.5%, suitable for high pressure flow measurement, the maximum pressure can reach 100Mpa, especially suitable for the measurement of small flow, the minimum measurement limit can be 0.3ml / min , Less affected by the viscosity characteristics of the medium, suitable for flow measurement under various viscosity conditions.

The CX-M and G series gear flow meters are novel volumetric flowmeters developed by Siemens engineers on the basis of adapting to the needs of the market. They have formed a variety of sizes and models. They have a compact size and structure. Simple, easy to install and maintain, with high measuring accuracy.chemical liquid micro flow meter has strong adaptability to the viscosity of the liquid to be measured. There is no special requirement for the change of the pressure of the liquid to be measured and the straight pipe section before and after. The flow rate is small and the flow can be measured automatically. The accurate measurement of the tiny flow of liquid.
1、Coperion Extruder: More than 75% of all new plastic materials in the world are in Coperion's test labs. This industry knows that most high-end odorless plastic particles are imported from abroad. In the production process, a certain proportion of water needs to be injected, more or less, and the plastic particles will have an unpleasant odor. According to different models and production, Coperion requires us to provide the ability to measure the water flow rate at 10~. 50ml/min flowmeter, so we CX-M2-SS flow in 0.5 ~ 150ml/min, and the material is a sanitary SS316L, so fully meet the requirements.
2、US TOYOTA robot factory: TOYOTA's confidentiality is as strict as that of the product. The following are information that Toyota confirms and can disclose. Toyota purchased our flowmeter for the robot arm at the time, and the medium was petroleum (translated literally Petroleum) minimum flow: 2.5cc/min, common flow: 2.5cc/min, maximum flow: 20cc/min, viscosity is 4.3cp, there are two special requirements, 1) product quality must be light, because the robot arm one day Thousands of swings back and forth. 2) Because the arm swings indefinitely, the flowmeter must be universal. These two points we happen to have proprietary technology can satisfy.
3、Bulgarian BEEA Food Additive Project: Quantitative addition of liquid during production, viscosity 5 cSt, 80 cSt and 150 cSt, flow rate 20 L/min, but each time quantification 50-2000 mL, clamp connection, and resolution required 1ml, so we customized high-frequency CX-M12-SS (0.3 ~ 30L/min), K coefficient of 0.421ml/p.

Chemical liquid micro flow meter, Contact email: sales6@microflowmeter.com