Fuel tank truck flow meter

fuel tank truck flow meter, Contact email: leon@microflowmeter.com

With the development of society, the state pays more and more attention to the process automation instrumentation industry. However, the Fuel tank truck flow meter industry has been in a vacancy and has been monopolized by major foreign brands such as Max, KRACHT, OVAL, etc. , People have long endured the expensive, long delivery, the sale can not be resolved in time and so on, such as semiconductor chip cutting a set of equipment on the millions, once the instrument problems, loss unimaginable, the slayer saw these phenomena, Resolutely resigned as senior engineer in the position of Siemens, the establishment of Shanghai Ji-sheng Instruments Co., Ltd., with great concentration on research and development of gear flow meter. We have Fuel tank truck flow meter has been awarded a number of certificates, it is no exaggeration to say that Qishen production Fuel tank truck flow meter For example, many customers replace the OVAL LSF40 with our CX-M5-AL because it costs less than half of the LSF40, but has twice the range than it does and has the same accuracy.

Shanghai JSN Micro Flow Meter CO.,LTD is located in the Shanghai Songjiang industry zone, which is a famous enterprice for research,produce,sales and service of flow meter, registered capital of 11 million RMB. Main products:mirco flow meter,fuel tank truck flow meter ,piston flow meter,gear flow meter,gear pump,mass flow meter. Products with superior performance, excellent quality has been the various professional certification and customer recognition. The company has a number of fluid measurement equipment experts and various types of senior engineer, continuous development and manufacturing, upgrading products are available every year.
Fuel tank truck flow meter is a new type of volumetric flowmeter, in addition to a positive displacement flowmeter with high accuracy, the flow is not sensitive to other advantages, there are the following advantages: Wide range, usually in the flow meter is 10: l, and Deep flowmeter is generally 100: 1, or even 1000: 1, the accuracy is still above 0.5%, suitable for high pressure flow measurement, the maximum pressure can reach 100Mpa, especially suitable for the measurement of small flow, the minimum measurement limit can be 0.3ml / min , Less affected by the viscosity characteristics of the medium, suitable for flow measurement under various viscosity conditions.

When the liquid to be measured enters the Fuel tank truck flow meter through the pipe, a pair of gears are continuously rotated due to the pressure difference between the inlet and the outlet, and the liquid measured by the initial cavity is continuously conveyed to the outlet. The number of rotations of the gear is The product of four times the displacement is the total amount of the measured liquid flow. Therefore, we can see from the measurement principle of the mirco flow meter that it depends on the indenter of the measured medium to drive the elliptic gear to rotate and measure. , has nothing to do with the fluid flow state.

1、Bulgarian BEEA Food Additive Project: Quantitative addition of liquid during production, viscosity 5 cSt, 80 cSt and 150 cSt, flow rate 20 L/min, but each time quantification 50-2000 mL, clamp connection, and resolution required 1ml, so we customized high-frequency CX-M12-SS (0.3 ~ 30L/min), K coefficient of 0.421ml/p.
2、US TOYOTA robot factory: TOYOTA's confidentiality is as strict as that of the product. The following are information that Toyota confirms and can disclose. Toyota purchased our flowmeter for the robot arm at the time, and the medium was petroleum (translated literally Petroleum) minimum flow: 2.5cc/min, common flow: 2.5cc/min, maximum flow: 20cc/min, viscosity is 4.3cp, there are two special requirements, 1) product quality must be light, because the robot arm one day Thousands of swings back and forth. 2) Because the arm swings indefinitely, the flowmeter must be universal. These two points we happen to have proprietary technology can satisfy.
3、Australia TECALFMIT company: The company is very professional in the lubrication industry, has more than 75 years of history, they need us to provide flow measurement of grease (high viscosity), the flowmeter under pressure requirements in the 40 ~ 100MPA.

fuel tank truck flow meter, Contact email: leon@microflowmeter.com