ogm flow meter

Ogm flow meter, Contact email: leon@microflowmeter.com

At present domestic Ogm flow meter structure is complex, bulky, bulky, noisy, small scale, not suitable for low viscosity liquid, the market is more common with DTO series and OGM series. For these problems the country has been unable to overcome, while the Shanghai JiShen instrument Instrument company oval gear Ogm flow meter does not have the above problems, such as the same DN25 caliber, our model CX-M25-AL, flow range: 0.5 ~ 100L / M, range of 1: 200 or higher, and weighs only 1.5KG , While the DTO-25, the flow of 600-6000L / H, range ratio of only 1:10, the weight of up to 23KG. All this due to technological breakthroughs, our chief engineer Tu workers, he is a former Siemens senior engineer, the use of equipment It is also Siemens CNC Machining Center with cutting accuracy up to 0.001mm, which ensures that we produce high quality flow meters.

Shanghai JSN Micro Flow Meter CO.,LTD is a new high-tech enterprise which specialized in Production,Sales for Flow Meter and Level instrument.We are located in one of the instrument production base Shanghai. We have many scientific and technical personnel engaged in the development and production for instruments,.product performance and quality reach the domestic advanced level. The company's various types of processing calibration equipment, can produce various types of special instruments outside the base type. We also have a group of strong technical experience abundant after-sales service personnel, on-site service and installation commissioning for you.Main products:Super Micro Liquid Flow Meter,Ogm flow meter ,Mass Flow Meter,Circle Spur Gear Flow Meter,Gear Pump,Gear metering Pump etc. We use advanced production equipment, mature processing technology, accurate inspection and measurement to allow you to buy a satisfactorily, comfortable, with confidence, professional flow meter and metering pump manufacturers.

Shanghai JSN Micro Flow Meter Co., Ltd. is the second manufacturer of micro Ogm flow meter in China. It is developed by Tu engineer (former Siemens senior engineer) with independent intellectual property rights. The production and processing equipment fully adopts Siemens CNC machining center to ensure the minimum flow 0.1ml / min, which is rare in the world, the accuracy of over 90% of peers. We can do more temperature 200C, the pressure can be customized to 1000bar, many customers use it, but also unbelievable. Also domestic Most of the flowmeter use a year after the new calibration, but the base depth meter after hundreds of conditions of medium test, the service life of more than 8 years, and without secondary calibration, since the establishment of the base depth instrument Instrument determined to be world-class flow meter, breaking the monopoly of international brands in the mirco flow meter industry, so that customers can buy in the country real German-made quality flow meter.
The ogm flow meter's metering principle is the same as that of a general volumetric flow meter. The gears mesh with the fluid to be transported. The fluid to be measured enters the chamber through the oil inlet and pushes the rotor so that the fluid is continuously divided into the same volume of fluid. Oil port output. For every one rotation of the rotor, the flowmeter outputs the same volume of fluid in the four metering chambers in the figure. By measuring the number of revolutions of the elliptical gear rotor, the volume flow through the fluid can be obtained.
1、Australia TECALFMIT company: The company is very professional in the lubrication industry, has more than 75 years of history, they need us to provide flow measurement of grease (high viscosity), the flowmeter under pressure requirements in the 40 ~ 100MPA.

Ogm flow meter, Contact email: leon@microflowmeter.com