adbrasive adhesive oval gear flow sensor

  adbrasive adhesive oval gear flow sensor   email: porter@microflowmeter.com

Shanghai JSNMicro Flow Meter CO.,LTD, under the guidance of the business principles of“Forge ahead with unity, strengthen management, create excellence, create brandname”, relying on scientific and technological advancement, the company takesits technological innovation, product innovation, quality innovation andservice innovation as its own responsibility, and constantly increases itsinvestment in innovation. The market scale and share of instrumentation ofsuper micro flow meter,oval gear flow meter ,mass flow meter,spur gear flowmeter,gear pump,gear metering pump etc, are also increasing year by year, andhave been widely praised by customers. In recent years, company has purchasedmore than 20 sets of large-scale professional CNC machining equipment; establishedand improved the Kingdee K3 ERP system, OA office system, PDM A series ofsoftware systems, such as image file management system, has effectivelyimproved the company"s management level. The company has achieved good socialbenefits while improving its own strength.



adbrasive adhesive oval gear flow sensor

Ovalgear flow meter  is widely used inpetroleum, chemical and hydraulic industries due to its advantages of highprecision, simple installation, stable performance and goodrepeatability.However, the Oval gear flow meter that can be produceddomestically can only be applied due to the impatience of high pressure In thelow pressure occasion, the high pressure measurement occasion can only rely onthe foreign imported high pressure flowmeter.Therefore, the research of thehigh pressure Oval gear flow meter will help to expand the domestic applicationof the Oval gear flow meter and promote the development of the domestic flowmeasurement. Deep instrumentation independent research and development of the Ovalgear flow meter pressure up to 1000bar, it can be said has reached a higherlevel in the world, and obtain measurement certificate.

Ovalgear flow meter is a new type of volumetric flowmeter, in addition to apositive displacement flowmeter with high accuracy, the flow is not sensitiveto other advantages, there are the following advantages: Wide range, usually inthe flow meter is 10: l, and Deep flowmeter is generally 100: 1, or even 1000:1, the accuracy is still above 0.5%, suitable for high pressure flowmeasurement, the maximum pressure can reach 100Mpa, especially suitable for themeasurement of small flow, the minimum measurement limit can be 0.3ml / min ,Less affected by the viscosity characteristics of the medium, suitable for flowmeasurement under various viscosity conditions.



adbrasive adhesive oval gear flow sensor

The Ovalgear flow meter is a volumetric flow meter that consists of a flow chamber in achamber and one or several elements that are rotated by fluid flow to form aflow meter. Leakage between the rotating element and the inner wall and theselected working range The internal flow rate is negligible. The rotation ofthe element is transmitted mechanically or by other means to the indicatingdevice to indicate the volume flow of the fluid flowing through.



adbrasive adhesive oval gear flow sensor

Remark: Hightemperature, high pressure, high frequency, special connection, specialmaterials, two-way measurement, etc. can be customized

a. Thegear does not rotate: The gear is jammed by debris, the gear and cavity need tobe cleaned, and the filter is cleaned or replaced.

b. Thesmall flow error is too large: The flowmeter is installed in the wrongdirection, the best position goes up and down, or there are impurities to blockthe gear and need to be cleaned.

c. Theflow error is too large: The actual use flow range is less than or far greaterthan the flowmeter range. The corresponding flowmeter must be selected.

d. Noflow sensor signal: The gear is stuck or the circuit is connected incorrectlyor the circuit is damaged. The gear and cavity must be cleaned, or the circuitmust be correctly connected or replaced.