micro flow meter

Micro flow meter, Contact email: leon@microflowmeter.com

Micro flow meter technology in the world has been quite mature, we are more common in the country DTO, OGM series, but the measured medium if the viscosity is low, the flow is too small, the leak of domestic flowmeter error is very obvious, can not guarantee the accuracy , Second, the measured medium temperature is too high, the error will increase, and the gear will be stuck may. After long-term use of Micro flow meter its internal gear will be corroded and worn, thus affecting the measurement accuracy . This greatly increased the user's maintenance costs.While deep base Micro flow meter using Siemens CNC machining center, the cutting height of 0.001mm precision, small flow can be measured to 0.1m / min, the temperature up to 200C, etc., in fact, these parameters have been Reached a higher level in the world, and even surpassed Clarke, San Mai, Aobal, Kebao, and other imported gear flow meters, and the deep flowmeter used to ensure that the life of more than 8 years.

Shanghai JSN Micro Flow Meter CO.,LTD is located in Shanghai Songjiang industrial park. We are the professional flow meter manufacture who integrate R&D, production and sales as one manufacturers. The factory is equipped with advanced production and calibration equipment at home and abroad, ample high-end technical personnel, and a well-established domestic standardized production workshop. It focuses on improving the status of China's flow meter industry in the international arena, and continues to work hard. Professional production:microw flow meter,micro flow meter ,mass flowmeter,spur gear flow meter,gear pump,gear metering pump etc. At the same time, our company adhering to the "integrity first, conscientiously do a good job in every product", strict control of each manufactured product, while achieving high product accuracy, excellent quality, low price, no doubt before the sale, no worries after-sale 5S standard, providing professional flow system solutions for each customer, providing selection suggestions free of charge, maximizing customer satisfaction, reducing customer investment costs.

Since May 23, 2011, Shanghai Jinshen Instrument Co., Ltd. successfully released a new micro flow meter CX-M and G series, the liquid flowmeter range than the first in China reached more than 1: 100, and at the same time to ensure accuracy 0.5% above the flowmeter industry model.From this since the base meter has been a pioneer in flowmeter technology, but also one of the high-end flowmeter brand.The perfect technical level, excellent quality standards, innovation has been innovation Wells said. Deep base flow meter has been to provide customers with a reliable use of the experience in the past rely on the import of the era, the customer has been a headache for after-sales service, and base deep flow meter with 8 years of use of the long life, in one fell swoop cracked this situation.
Micro flow meter, also known as fixed displacement flowmeter, referred to as PD flowmeter, is a class of high accuracy in flow meters. It is especially suitable for high and low viscosity media flow measurement. Mirco flow meter utilizes mechanical measuring elements to make fluid continuous Constantly divided into a single known volume fraction, the total volume of fluid is measured according to the number of times that the measuring chamber fills and discharges the volume of fluid successively and repeatedly.

1、Tai'an injector nozzle test bench manufacturer: Tai'an is the production base of China's common rail injector test bench. It has produced more than half of China's injector test benches. Previously only KRACHT, OVAL, etc. were selected. Most of us use our CX-M5-AL (5~1000ml/min), the annual purchasing volume exceeds 500 units, and we have specially developed a test bed for the test bench: CX-M3-CRI: 1~400ml/min is used to adapt Most models.
2、1) BYD electric vehicle: The battery of the electric vehicle needs to add electrolyte, the price of one side of the electrolyte is very expensive, and on the other hand, whether the electrolyte is added accurately has a great influence on the quality of the product, so BYD's requirements were very demanding at that time. Only 1 ~ 2ml/min, duration of only 3 seconds, fortunately I was not an expert in ultramir flow meter, with CX-M2-SS took orders.

Micro flow meter, Contact email: leon@microflowmeter.com