glue micro flow meter

Glue micro flow meter, Contact email: sales6@microflowmeter.com

Once upon a time, China's manufacturing industry in the world's processing plant has always been the "low quality" representative of the world. In particular, the Glue micro flow meter for automatic process control has the advantages of large volume, large noise, small turndown ratio, , The use of easy to leak, instability and so on, leaving customers a headache is that many problems in the early stages of product does not appear, and in the event of after-sale is very troublesome, bothering money, these are domestic objective objective existence of Glue micro flow meter Therefore, users buy Glue micro flow meter is like buying lottery tickets, do not know sent to the installation site Glue micro flow meter is a blessing, in a sense, is a matter of course, while the base depth meter appeared to solve these problems in one fell swoop.
Shanghai JSN Micro Flow Meter CO.,LTD main products:electromagnetic flow meter, Super Micro Liquid Flow Meter,Glue micro flow meter ,Mass Flow Meter,Circle Spur Gear Flow Meter,Gear Pump,Gear metering Pump etc. Which is widely used for electricity, petrochemical, metallurgy, paper, medicine, urban heating, food, textile and sewage treatment in multiple industries. For the past years, JSN base on many years of experience in instrument production management and combined with the ISO9001 quality management system, the company has concluded a set of quality management systems suitable for the instrument company's industry. Therefore, from the processing technology to quality management, etc. Standard manufacturing, production, in order to effectively guarantee to provide customers with high quality, reliable products.
A new generation of deep base Glue micro flow meter has been officially listed on the national market in early 2017. This is a newly developed volumetric flowmeter or a positive displacement flowmeter developed by QWEN engineers combining advanced technologies both at home and abroad. Deep base of the exhibition hall, will see the flow meters on behalf of the generation (such as DTO, CX-FM, CX-M, CX-G series), also see the base depth meter in the continuous technological innovation. Is characterized by small flow, a large range, high precision, long life. Through several iterations, the quality of the product is getting higher and higher, while the price is less than one-third of the imported brands, can be said that the Shanghai base deep mirco flow meter Successful development, domestic customers do not have to worry about delivery, sale and other issues.
The Glue micro flow meter consists of a metering box and a pair of gears mounted in the metering box. It forms a sealed initial moon cavity with the upper and lower cover plates as a unit of calculation of the primary displacement. When the measured liquid enters the flow meter through the pipe, The pressure difference generated at the outlet pushes a pair of gears to continuously rotate, and the liquid measured by the initial cavity is continuously delivered to the outlet. The product of the number of rotations of the gear and four times of each displacement is the measured liquid flow rate. The total flowmeter is mainly composed of a housing, a counter, a gear and a coupling (magnetic coupling and axial coupling).
1、McDonald's thermoking cold chain transporter: Remotely monitor the fuel consumption of cold storage and transport vehicle engines via GPS. The cold storage engine uses our CX-M6-AL (0.5~100L/H), and the vehicle engine uses CX-M9-AL (6~ 600L/H), accuracy requirements are 0.5%FS, pass pulse output to GPS module for remote monitoring.
2、Tai'an injector nozzle test bench manufacturer: Tai'an is the production base of China's common rail injector test bench. It has produced more than half of China's injector test benches. Previously only KRACHT, OVAL, etc. were selected. Most of us use our CX-M5-AL (5~1000ml/min), the annual purchasing volume exceeds 500 units, and we have specially developed a test bed for the test bench: CX-M3-CRI: 1~400ml/min is used to adapt Most models.