Corrosive liquid micro flow meter

corrosive liquid micro flow meter, Contact email: sales6@microflowmeter.com

Once upon a time, China's manufacturing industry in the world's processing plant has always been the "low quality" representative of the world. In particular, the Corrosive liquid micro flow meter for automatic process control has the advantages of large volume, large noise, small turndown ratio, , The use of easy to leak, instability and so on, leaving customers a headache is that many problems in the early stages of product does not appear, and in the event of after-sale is very troublesome, bothering money, these are domestic objective objective existence of Corrosive liquid micro flow meter Therefore, users buy Corrosive liquid micro flow meter is like buying lottery tickets, do not know sent to the installation site Corrosive liquid micro flow meter is a blessing, in a sense, is a matter of course, while the base depth meter appeared to solve these problems in one fell swoop.

Shanghai JSN Micro Flow Meter CO.,LTD is a family enterprise, has 30 years history. It's established by engineer of Siemens. The production base is located in Shanghai Songjiang Hi-Tech Zone. The company has modernized standard factory buildings and intelligent office buildings, professional gear flow meter and gear pump research department and the most advanced performance test bench in China.Which imjnmnmnm s a research, development, production, sales, service in one, cross-country, cross-regional integrated enterprise. The company has a German high-end gear flow meter and gear pump production technology, has an international advanced management model and first-class Production equipment, specializing in the production of mirco flow meter, optional corrosive liquid micro flow meter , electromagnetic flow meter, mirco flow meter, piston flow meter, mass flow meter, gear flow meter, gear pump and other products. Widely used in water conservancy, construction, fire protection, Electricity, metallurgy, chemical industry, environmental protection, pharmaceuticals, food and other fields.
The CX-M and G-series mirco flow meters are the world's new volumetric flowmeters introduced by BASF in 2011. Since its establishment, the CX-M corrosive liquid micro flow meter and the G-series mirco flow meters have been selling well in the market for more than 100,000 units a year since they were sold. The third generation launched in 2017, with more than 90% accuracy and stability, won the certification of the National Bureau of Metrology. The quality and reliability of Shanghai JiShen instruments need not worry. According to the statistics of China Instrument Association, Deep flow meter reliability has always been ranked in the top 3, especially in the long-term statistics failure rate is far below the industry average, deep advocate "the best after-sales service is no service", but also achieved a continuous three years without quality complaints .

The corrosive liquid micro flow meter, which is a type of positive displacement flow meter, is a high-precision type in the flow meter. It uses mechanical measuring elements to continuously divide the fluid into a single known volume part, and repeats according to the measurement chamber one by one. The volume of the volume of fluid filled and discharged to measure the total flow volume. The base of the deep mirco flow meter can use different materials, such as alumina, SS316L stainless steel, special plastic, titanium alloy, etc., in order to adapt to different media and conditions.
1、Bulgarian BEEA Food Additive Project: Quantitative addition of liquid during production, viscosity 5 cSt, 80 cSt and 150 cSt, flow rate 20 L/min, but each time quantification 50-2000 mL, clamp connection, and resolution required 1ml, so we customized high-frequency CX-M12-SS (0.3 ~ 30L/min), K coefficient of 0.421ml/p.
2、SAWCORLTD is a large-scale automobile painting company. The customer uses a spray paint which is a mixture of a certain percentage of resin, butyl acetate and other solvents. To control the quality, it is necessary to ensure that the flow rate is 20ml/min, less than 19ml/min or Above 21ml/min need alarm.
3、Australia TECALFMIT company: The company is very professional in the lubrication industry, has more than 75 years of history, they need us to provide flow measurement of grease (high viscosity), the flowmeter under pressure requirements in the 40 ~ 100MPA.

corrosive liquid micro flow meter, Contact email: sales6@microflowmeter.com