Polyurethane flow meter

Polyurethane flow meter, Leon@microflowmeter.com

With the development of society, the state pays more and more attention to the process automation instrumentation industry. However, the Polyurethane flow meter industry has been in a vacancy and has been monopolized by major foreign brands such as Max, KRACHT, OVAL, etc. , People have long endured the expensive, long delivery, the sale can not be resolved in time and so on, such as semiconductor chip cutting a set of equipment on the millions, once the instrument problems, loss unimaginable, the slayer saw these phenomena, Resolutely resigned as senior engineer in the position of Siemens, the establishment of Shanghai Ji-sheng Instruments Co., Ltd., with great concentration on research and development of gear flow meter. We have Polyurethane flow meter has been awarded a number of certificates, it is no exaggeration to say that Qishen production Polyurethane flow meter For example, many customers replace the OVAL LSF40 with our CX-M5-AL because it costs less than half of the LSF40, but has twice the range than it does and has the same accuracy.

Shanghai JSN Micro Flow Meter CO.,LTD is located in the centre of Shanghai-Songjiang industry zone. It is one of the major manufacturers of flowmeters and gear pumps in the south of China. We have been providing professional flow instrumentation equipment for polyurethane, dispensing, automotive, hydraulic, mining, metallurgy, petroleum, machine tools, and chemical industries for a long time. Now we have a scientific research team composed of engineers and technicians with more than 20 years of experience in fluid instrument manufacturing, advanced manufacturing equipment, complete testing methods, and a sound quality management system. Each year we can provide hundreds of thousands of units (sets) various instruments.Main products:super micro flow meter,polyurethane flow meter ,coriolis mass flow meter,electromagnetic flow meter,piston flow meter,spur gear flow meter,gear pump,gear meteringpump etc.

The CX-M and G-series mirco flow meters are the world's new volumetric flowmeters introduced by BASF in 2011. Since its establishment, the CX-M polyurethane flow meter and the G-series mirco flow meters have been selling well in the market for more than 100,000 units a year since they were sold. The third generation launched in 2017, with more than 90% accuracy and stability, won the certification of the National Bureau of Metrology. The quality and reliability of Shanghai JiShen instruments need not worry. According to the statistics of China Instrument Association, Deep flow meter reliability has always been ranked in the top 3, especially in the long-term statistics failure rate is far below the industry average, deep advocate "the best after-sales service is no service", but also achieved a continuous three years without quality complaints .
The polyurethane flow meter, which is a type of positive displacement flow meter, is a high-precision type in the flow meter. It uses mechanical measuring elements to continuously divide the fluid into a single known volume part, and repeats according to the measurement chamber one by one. The volume of the volume of fluid filled and discharged to measure the total flow volume. The base of the deep mirco flow meter can use different materials, such as alumina, SS316L stainless steel, special plastic, titanium alloy, etc., in order to adapt to different media and conditions.

1、1) BYD electric vehicle: The battery of the electric vehicle needs to add electrolyte, the price of one side of the electrolyte is very expensive, and on the other hand, whether the electrolyte is added accurately has a great influence on the quality of the product, so BYD's requirements were very demanding at that time. Only 1 ~ 2ml/min, duration of only 3 seconds, fortunately I was not an expert in ultramir flow meter, with CX-M2-SS took orders.
2、US TOYOTA robot factory: TOYOTA's confidentiality is as strict as that of the product. The following are information that Toyota confirms and can disclose. Toyota purchased our flowmeter for the robot arm at the time, and the medium was petroleum (translated literally Petroleum) minimum flow: 2.5cc/min, common flow: 2.5cc/min, maximum flow: 20cc/min, viscosity is 4.3cp, there are two special requirements, 1) product quality must be light, because the robot arm one day Thousands of swings back and forth. 2) Because the arm swings indefinitely, the flowmeter must be universal. These two points we happen to have proprietary technology can satisfy.
3、Han's laser chip cutting: Han's laser is the world's leading manufacturer of laser processing equipment. In the semiconductor chip production process, because of heat generation, it is necessary to continuously spray cutting fluid, and our laser equipment and chips are high-end industries. High quality requirements, a slight careless product quality will be seriously affected, so Han's laser strictly to control the flow in 2ml/min.

Polyurethane flow meter, Leon@microflowmeter.com