Odorization micro flow meter

Odorization micro flow meter, Contact email: sales6@microflowmeter.com

Odorization micro flow meter technology in the world has been quite mature, we are more common in the country DTO, OGM series, but the measured medium if the viscosity is low, the flow is too small, the leak of domestic flowmeter error is very obvious, can not guarantee the accuracy , Second, the measured medium temperature is too high, the error will increase, and the gear will be stuck may. After long-term use of Odorization micro flow meter its internal gear will be corroded and worn, thus affecting the measurement accuracy . This greatly increased the user's maintenance costs.While deep base Odorization micro flow meter using Siemens CNC machining center, the cutting height of 0.001mm precision, small flow can be measured to 0.1m / min, the temperature up to 200C, etc., in fact, these parameters have been Reached a higher level in the world, and even surpassed Clarke, San Mai, Aobal, Kebao, and other imported gear flow meters, and the deep flowmeter used to ensure that the life of more than 8 years.

Shanghai JSN Micro Flow Meter CO.,LTD is in the wave of market economy struggle, development has been decades, has a high visibility, enjoy good reputation.Main products: super micro liquid flow meter,odorization micro flow meter ,mass flow meter, circle spur gear flow meter,gear pump,gear metering pump etc instrument. With its excellent cost-effectiveness for the user's favor. We have a serious work attitude, solid business foundation, strong sense of solidarity and cooperation, a strong professional and technical staff.
A new generation of deep base Odorization micro flow meter has been officially listed on the national market in early 2017. This is a newly developed volumetric flowmeter or a positive displacement flowmeter developed by QWEN engineers combining advanced technologies both at home and abroad. Deep base of the exhibition hall, will see the flow meters on behalf of the generation (such as DTO, CX-FM, CX-M, CX-G series), also see the base depth meter in the continuous technological innovation. Is characterized by small flow, a large range, high precision, long life. Through several iterations, the quality of the product is getting higher and higher, while the price is less than one-third of the imported brands, can be said that the Shanghai base deep mirco flow meter Successful development, domestic customers do not have to worry about delivery, sale and other issues.
The Odorization micro flow meter is a volumetric flow meter. The metering chamber is composed of upper and lower end caps. The shell is formed by an oval gear rotor. The gear rotor meshes with the rotating shaft to convey the fluid. The permanent magnet arranged in the rotor is used for the detection of the rotor rotation. Two sensor holes are placed on the upper end to cover the detection sensor. A sealing ring is installed between the housing and the upper and lower end caps to prevent leakage of the measurement fluid. The base depth flowmeter is made of a material with high wear resistance so that the flowmeter Can guarantee high precision measurement within the long service life.

1、Coperion Extruder: More than 75% of all new plastic materials in the world are in Coperion's test labs. This industry knows that most high-end odorless plastic particles are imported from abroad. In the production process, a certain proportion of water needs to be injected, more or less, and the plastic particles will have an unpleasant odor. According to different models and production, Coperion requires us to provide the ability to measure the water flow rate at 10~. 50ml/min flowmeter, so we CX-M2-SS flow in 0.5 ~ 150ml/min, and the material is a sanitary SS316L, so fully meet the requirements.
2、Luoyang Hydraulic Valve Measurement and Control: We know that hydraulic valves, hydraulic pumps, and hydraulic cylinders have a large turndown ratio, and need to detect hydraulic leakage in the test. Some of them require a hydraulic flowmeter with a 1:1000 ratio, and the customer found us at that time. It is to test the leakage of the hydraulic valve, test No. 32 hydraulic oil, leakage amount is 5ml/min
3、Australia TECALFMIT company: The company is very professional in the lubrication industry, has more than 75 years of history, they need us to provide flow measurement of grease (high viscosity), the flowmeter under pressure requirements in the 40 ~ 100MPA.

Odorization micro flow meter, Contact email: sales6@microflowmeter.com