Cutting fluid micro flow meter

Cutting fluid micro flow meter, Contact email: sales6@microflowmeter.com

Cutting fluid micro flow meter technology in the world has been quite mature, we are more common in the country DTO, OGM series, but the measured medium if the viscosity is low, the flow is too small, the leak of domestic flowmeter error is very obvious, can not guarantee the accuracy , Second, the measured medium temperature is too high, the error will increase, and the gear will be stuck may. After long-term use of Cutting fluid micro flow meter its internal gear will be corroded and worn, thus affecting the measurement accuracy . This greatly increased the user's maintenance costs.While deep base Cutting fluid micro flow meter using Siemens CNC machining center, the cutting height of 0.001mm precision, small flow can be measured to 0.1m / min, the temperature up to 200C, etc., in fact, these parameters have been Reached a higher level in the world, and even surpassed Clarke, San Mai, Aobal, Kebao, and other imported gear flow meters, and the deep flowmeter used to ensure that the life of more than 8 years.

Shanghai JSN Micro Flow Meter CO.,LTD has a complete planning, design, research and development, manufacturing, sales, service system, is committed to providing high-quality,high-performance micro flowmeters,Cutting fluid micro flow meter ,electromagnetic flow meter,mass flow meter,piston flow meter,gear flow meter,gear pump,gear metering pump for professional channel customers and end customers at home and abroad. Since the 1980s, it has relied on a strong technical R&D team to focus on the field of flow meter measurement, and developed ultra-miniature, high-precision, high-frequency, high-pressure, and large-scale flow metering equipment. Today, there are more than 500,000 units (sets) products are serving all corners of the country and are widely used in polyurethane, dispensing, hydraulic, odor, petrochemical, power, military, aerospace, scientific research, nuclear industry, cement, metallurgy, steel and other industries.
A new generation of deep base Cutting fluid micro flow meter has been officially listed on the national market in early 2017. This is a newly developed volumetric flowmeter or a positive displacement flowmeter developed by QWEN engineers combining advanced technologies both at home and abroad. Deep base of the exhibition hall, will see the flow meters on behalf of the generation (such as DTO, CX-FM, CX-M, CX-G series), also see the base depth meter in the continuous technological innovation. Is characterized by small flow, a large range, high precision, long life. Through several iterations, the quality of the product is getting higher and higher, while the price is less than one-third of the imported brands, can be said that the Shanghai base deep mirco flow meter Successful development, domestic customers do not have to worry about delivery, sale and other issues.
The CX-M and G series gear flow meters are novel volumetric flowmeters developed by Siemens engineers on the basis of adapting to the needs of the market. They have formed a variety of sizes and models. They have a compact size and structure. Simple, easy to install and maintain, with high measuring accuracy.Cutting fluid micro flow meter has strong adaptability to the viscosity of the liquid to be measured. There is no special requirement for the change of the pressure of the liquid to be measured and the straight pipe section before and after. The flow rate is small and the flow can be measured automatically. The accurate measurement of the tiny flow of liquid.

1、Iran GG GAS CONTROL: GC was established in 1990 is Iran's well-known natural gas odor company, odor is very expensive, the viscosity is only 0.55cp (20C), the requirement is the minimum flow of 0.05 L / H, commonly used flow: 0.1L /H, maximum flow 0.3 L/H, and require explosion protection.
2、1) BYD electric vehicle: The battery of the electric vehicle needs to add electrolyte, the price of one side of the electrolyte is very expensive, and on the other hand, whether the electrolyte is added accurately has a great influence on the quality of the product, so BYD's requirements were very demanding at that time. Only 1 ~ 2ml/min, duration of only 3 seconds, fortunately I was not an expert in ultramir flow meter, with CX-M2-SS took orders.
3、McDonald's thermoking cold chain transporter: Remotely monitor the fuel consumption of cold storage and transport vehicle engines via GPS. The cold storage engine uses our CX-M6-AL (0.5~100L/H), and the vehicle engine uses CX-M9-AL (6~ 600L/H), accuracy requirements are 0.5%FS, pass pulse output to GPS module for remote monitoring.

Cutting fluid micro flow meter, Contact email: sales6@microflowmeter.com